Header Snap Rings
Header Wave Springs
Top Navigation 1Home  |  About Us  |  What's New  |  Part Lookup  |  Specials  |  Get Samples  |  Information Center  |  Quality  |  Ask the Expert  |  Careers  |  Contact UsTop Navigation 2
Top Navigation Cap 1 Top Navigation Spacer Top Navigation Cap 2
Use of Smalley Retaining Ring in medical application

Smalley Medical

  • Stock 302 and 316 Stainless Steel Retaining Rings
  • Wave Springs that Require 50% Less Space/Weight
  • Pharmaceutical Quality
  • Titanium Available
  • Small Diameters

Smalley Steel Ring Company is a leading manufacturer of Spirolox Retaining Rings and Wave Springs for the medical industry. Smalley prides itself on its commitment to the highest quality and performance standards. Each Retaining Ring and Wave Spring is engineered with our No-Tooling-Charge™ process allowing for endless possibilities in dimension and material to suit your medical application needs

 

There are more than 10,000 parts in stock, and all parts are available in 302 and 316 stainless steel; titanium and other exotic alloys are readily available. Should you require special design assistance, our staff of engineers is able to provide free design consultation. Free CAD downloads and part samples are available to facilitate fast and efficient prototyping.

 

Spirolox® Retaining Rings

  • No Ears to Interfere® with mating components
  • Standard sizes from ¼" to 16"
  • Aesthetically pleasing
  • 6,000 standard rings from stock in 302 and 316 stainless
  • Specials from .200" to 120" with No-Tooling-Charges™

Spiral Retaining rings have No Ears to Interfere™ with mating components in an application and are compatible with snap ring grooves.

 

Spirolox Retaining Rings are functional while being aesthetically pleasing. They have no gap or lugs allowing for tight radial applications.

 

Over 6,000 standard retaining rings are available from stock in both 302 and 316 stainless steel in sizes from ¼" to 16". Specials can be manufactured in sizes from .200" to 120" with No-Tooling-Charges™.

 

If you have any questions please email us.

Wave Springs

  • Greatly decrease spring weight
  • Reduce operating height by up to 50%
  • Small sizes fit into tight radial and axial spaces
  • Designed to satisfy precise operating conditions
  • Standard sizes from ¼" to 16", 6 mm to 60 mm
  • 4,000 standard springs from stock in 302 and 316 stainless
  • Specials from .200" to 120" with No-Tooling-Charges™

Smalley flat wire Wave Springs reduce operating height by up to 50% with the same force and deflection as coil springs, allowing them to fit in small applications other springs cannot. Wave Springs are manufactured to satisfy precise operating conditions, including the tight radial and axial spaces, found in many medical applications.

 

Over 4,000 standard springs are available from stock in stainless steel in diameters from¼" to 16". Specials can be custom designed with No-Tooling-Charges™ in sizes from .200" to 120".

 

If you have any questions please email us.

 
Right Navigation Divider 1

Quick Search



Right Navigation Divider 2

Wave Spring and
Retaining Ring
Part Search

Enter a partial or full wave spring or retaining ring part number below:

Right Navigation Divider 3

Site Search

Right Navigation Divider 4 Smalley Wave Spring, Retaining Ring and Snap Ring Company Europe Smalley Wave Spring, Retaining Ring and Snap Ring Company Nordic Smalley Wave Spring, Retaining Ring and Snap Ring Company Latin Spirolox by Smalley Wave Spring, Retaining Ring and Snap Ring Company
Quick Question
Name

E-mail

Phone Number

Question

Verification Code
Verification
Change Image


Bottom Navigation Cap 1 Bottom Navigation Spacer Bottom Navigation Cap 3
Bottom Footer 1
© 2014 Smalley Steel Ring Company. All rights reserved.Terms of Use | Privacy Policy | Terms & Conditions | Export Compliance | Environment | Email Us | Directions | Site Map | Mobile Site
Bottom Footer 2
Bottom Interface 1   Bottom Interface 2